Ward Valve, Y Strainer

Ward Valve

Check Valves With Teflon® Seals
Patented Teflon® Seal - Range of Sizes from 1/4" to 4" - Range of Connections Threaded Ends - Butt Welded Ends - Socket Welded Ends - Flanged Ends
ward-valves Special features make the ward valve unique. A patented spring-loaded plunger (A) provides perfectly calibrated resistance to back pressure. An angled self-aligning disk (B) is positioned for positive sealing. Totally encapsulated by Teflon®, the silicone rubber disk flexes, thus insuring full line-contact seal... 

More information ...




Y Strainer

Ward Y Strainer Range of Sizes from 1/4" to 4" - Range of Connections
ward-valves Special features generate the Y Strainertop quality performance. Its "Y" pattern design keeps fluids flowing with minimal obstruction. As fluid flows into the strainer (A), contaminants are strained out of the solution and collected on the screen (B) near the release (C). The Teflon body seal (D) is available with graphite for higher temperatures. Contaminant-free fluid flows out of the strainer’s other end. The stainless steel screens (B) come in a variety of mesh counts. 

More information ...

Save

Threaded Stainless Steel Strainers 16
Threaded Stainless Steel Strainers 16
Unleaded Strainer
Size(s): 1/4 to 2 in. (8 to 50 mm)
816HS
816HS
Ward Check Valves
Size(s): 1 in. (8 to 50 mm)
816FC
816FC
Ward Check Valves
Size(s): 1/4 to 2 in. (8 to 50 mm)
816FL
816FL
Ward Check Valves
Size(s): 1 to 2 in. (25 to 100 mm)
816
816
Ward Check Valves
Size(s): 1/4 to 2 in. (8 to 50 mm)
Facebook YouTube Linked-In
Customer Satisfaction Survey Take our Customer
Satisfaction Survey
Low Lead Law
Product Certification
Complies with Lead Plumbing Law
Rep Locator
Shipment Tracking
UPS FedEX
National Ground Water Association Water Systems Council weftec American Water Works Association Submersible Wastewater Pump Association