Flo-E-Centric® Plug Valves

Plug Valves, Plug Valve Manufacturer

The Flomatic® Flo-E-Centric® seat and plug face are offset from the shaft centerline to provide tight shut off and wear resistance.  They are have a specially designed plug moving in and out of the seat with minimal contact results in low operating torque. The eccentric plug valve is for systems where slurries, grit or solids are present. The eccentric plug valve is a quarter turn valve allowing cost effective solution with low torque actuation for pump control, shut-off and throttling operation.

Plug Valves

  • Size(s): 2 to 12 in. Series 5400 valves are rated 200 psi (1,380 kPa), Ductile iron Body ASTM A536 65-45-12, NSF 61 Approved Powder, Buna-N Plug, V-Type Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
    Flo-E-Centric
    Manufactured by: Flomatic Corporation
    Model: Plug Valve with Bare Stem Model 54-B
  • Size(s): 2 to 8 in. Series 5400 valves are rated 200 psi (1,380 kPa), Ductile iron Body ASTM A536 65-45-12, NSF 61 Approved Powder, Buna-N Plug, V-Type Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
    Flo-E-Centric
    Manufactured by: Flomatic Corporation
    Model: Plug Valve with 2
  • Size(s): 2 to 8 in. Series 5400 valves are rated 200 psi (1,380 kPa), Ductile iron Body ASTM A536 65-45-12, NSF 61 Approved Powder, Buna-N Plug, V-Type Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
    Flo-E-Centric
    Manufactured by: Flomatic Corporation
    Model: Plug Valve Handle for 2" Operating Nut (for Model 54-4)
  • Size(s): 3 to 12 in. Series 5400 valves are rated 200 psi (1,380 kPa), Ductile iron Body ASTM A536 65-45-12, NSF 61 Approved Powder, Buna-N Plug, V-Type Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
    Flo-E-Centric
    Manufactured by: Flomatic Corporation
    Model: Plug Valve with Gear Box Model 54-0 (Direct Mounted)
  • Size(s): 2 to 12 in. Series 5400 valves are rated 200 psi (1,380 kPa), Ductile iron Body ASTM A536 65-45-12, NSF 61 Approved Powder, Buna-N Plug, V-Type Packing, Self Lubricating Type 316 Stainless Steel thrust bearing.
    Flo-E-Centric
    Manufactured by: Flomatic Corporation
    Model: Plug Valve with ISO Mounting Bracket Model 54-6
  • Size(s): 2 to 12 in. Electric actuated plug valve, 110 VAC power for open/close service manual handwheel override. Temp Max: 180°F (82C) Pressure Max: 200 PSI
    Flo-E-Centric
    Manufactured by: Flomatic Corporation
    Model: Plug Valve with Actuator
Facebook YouTube Linked-In
Customer Satisfaction Survey Take our Customer
Satisfaction Survey
Low Lead Law
Product Certification
Complies with Lead Plumbing Law
Rep Locator
Shipment Tracking
UPS FedEX
National Ground Water Association Water Systems Council weftec American Water Works Association Submersible Wastewater Pump Association