Cycle Gard
Constant Pressure Pump Control - Cycle Gard vs. Cycle Stop Cross Reference chart
| Size | Flomatic Cycle Gard® | Cycle Stop Model |
|---|---|---|
| 3/4" - 2" | Cycle Gard I Model C152E | Not available |
| 1" F NPT & 1 1/4" M NPT | Cycle Gard Model C152ET | Not available |
| 1" F NPT & union nut both end | Cycle Gard IV Model CB152E | Not available |
| 1" F NPT & 1 1/4" M NPT | Cycle Gard IV Model CB152E | Not available |
| 1" F NPT & 1 1/4" M NPT | Cycle Gard IV Model CB152SST | CSV1A (SS body) |
| 1" F NPT & 1 1/4" M NPT | Cycle Gard Model C153S6 | Not available |
| 1" F NPT & 1 1/4" M NPT | Cycle Gard Model C153S6-3 | Not available |
| 1 1/4" Female | Cycle Gard Model C153S6 | CSV125(PSI)-1 thermoplastic body |
| 1 1/4" Female | Cycle Gard Model C153S6-3 | CSV125(PSI)-3 thermoplastic body |
| 1 1/4" | Cycle Gard Hy-Flow Model C152EHF | CSV2W1.25T-2575 (no lead brass body) |
| 1 1/4" | Cycle Gard Hy-Flow Model C152EHF | CSV2W1.25T-50120 (no lead brass body) |
| 1 1/2" & 2" | Cycle Gard CI-2 Model CIN101-2 (5 GPM by-pass) | Not available |
| 2" | Cycle Gard CI Model CIN101-2 (adjustable by-pass) | CSV3B-2T |
| 1 1/4" threaded female | Cycle Gard II Model CN101 | Not available |
| 1 1/2" threaded or flanged | Cycle Gard II Model CN101 | Not available |
| 2" threaded or flanged | Cycle Gard II Model CN101 | CSV3B-2T |
| 2 1/2" threaded or flanged | Cycle Gard II Model CN101 | Not available |
| 3" threaded or flanged | Cycle Gard II Model CN101 | CSV3B-3T (cast iron) |
| 4" 150# flanged | Cycle Gard II Model CN101 | CSV38-4F 9 (cast iron) |
| 6" 150# flanged | Cycle Gard II Model CN101 | CS3B-6F (cast iron) |
| 8" 150# flanged | Cycle Gard II CN101 | CSV3B-8F (cast iron) |
| 10" 150# flanged | Cycle Gard II CN101 | CSV3B-10F (cast iron) |
| 12" 150# flanged | Cycle Gard II CN101 | CSV3B-12F (cast iron) |
Disclaimer: All products listed above are not exactly comparable and are listed to give the reader some reference that should be verified with the manufacturer of the product. Also, all data and performance values contained in this publication are for general information only and should not, therefore, be used or relied upon for any specific application without independent competent professional examination and verification of its accuracy, suitability, and applicability. Anyone making use of performance values contained herein does so at their own risk and assumes any and all liability resulting from such use. Flomatic® Corporation disclaims any and all expressed or implied warranties of fitness for any general or particular application.
