Flomatic Corporation News

We bring you all of the new information here first. From Press Releases, to new products, this is where you should look to find out what is new and happening at Flomatic® Valves.

Proper Check Valve Selection Will Reduce Maintenance and Roping in Wastewater Pumping Systems

Proper Check Valve Selection Will Reduce Maintenance and Roping in Wastewater Pumping Systems

10/26/2020

Recent increases in flushed nondegradable items can mean serious problems, but using the right valves will helpChoosing the appropriate check valve for wastewater applications isn’t as simple as it used to be, as the amount and type of modern trash going through wastewater pipelines is steadily increasing and changing.Today’s increased ...

continue reading

Flomatic® expands their AIS compliant Model 80DIVFD Check Valves with new size

Flomatic® expands their AIS compliant Model 80DIVFD Check Valves with new size

10/21/2020

October 21, 2020 Glens Falls, NY – Flomatic is proud to announce the expansion of their American Iron and Steel (AIS) complaint Model 80DIVFD submersible pump check valve in a new 10” size. Flomatic’s new, special patented submersible pump check valve is now available in an extended size range from 1” thru 10” for use ...

continue reading


Flomatic® expands their AIS compliant Model 408 Ball Check Valves with new sizes.

Flomatic® expands their AIS compliant Model 408 Ball Check Valves with new sizes.

9/25/2020

September 25, 2020 Glens Falls, NY – Flomatic is proud to announce the expansion of their American Iron and Steel (AIS) complaint Model 4082 Ball Check Valve family with new sizes in 8” & 12”. The Model 4082 Ball Check Valve is now available in a complete size range from 3” through 12”.  Additional AIS type va...

continue reading

Shutoff Valves: When and Where to Select a Butterfly Valve, a Gate Valve, or a Plug Valve

Shutoff Valves: When and Where to Select a Butterfly Valve, a Gate Valve, or a Plug Valve

8/21/2020

As their name suggests, shut-off valves are designed to ultimately stop fluid flow or throttle it back to achieve desired flow parameters. These mechanisms serve a vital role in system function and are all too often overlooked when it comes to essential components.All shut-off valves are built to stop or slow water at a specific point in a pipeline...

continue reading


Flomatic® expands their AIS compliant Model 92 Swing Check Valves with new sizes

Flomatic® expands their AIS compliant Model 92 Swing Check Valves with new sizes

8/20/2020

August 19, 2020 Glens Falls, NY – Flomatic is proud to annouce the expansion of their growing AWWA Swing Check Valve family with the new 10” American Iron and Steel (AIS) complaint Model 92. The AWWA model 92 Swing Check Valves is available in a size range of 4”, 6”, 8” and 10” . Additional AIS type valves and si...

continue reading

How to Select the Right Check Valve in a Waste Water Application

How to Select the Right Check Valve in a Waste Water Application

7/29/2020

There are many questions you should ask to determine which check valve is best for your applicationCheck valves are often one of the most overlooked and misunderstood components of a water flow system, but using the proper size and style is essential for efficient operation.Simply stated, check valves are designed to allow flow only in one directio...

continue reading


Flomatic® Break-Off Plugs now available in  2”- 12” valve size range.

Flomatic® Break-Off Plugs now available in 2”- 12” valve size range.

6/22/2020

June 22, 2020, Glens Falls, NY – Flomatic expands its Break-Off Plug selection on their Model PLG (Stainless steel) and Model PPLG (Composite). Designed for Domestic Well Water Pump systems, Municipal Well water systems, and Irrigation & Sprinkler system applications; Flomatic Break-Off Plugs are available in different plug sizes 1/8...

continue reading

Flomatic announces NSF/ANSI 61 & 372 certifications on all VFD models

Flomatic announces NSF/ANSI 61 & 372 certifications on all VFD models

5/26/2020

May 26, 2020, Glens Falls, NY – Flomatic® is proud to announce that all of its VFD Series Check Valves are NSF/ANSI 61 certified for drinking water systems.  In addition to NSF/ANSI 372, the low-lead standard has a weighted average of 0.25% lead content by dry weight. NSF/ANSI 61 – Drinking Water Standards - Are a set of n...

continue reading


Flomatic® introduces their NSF/ANSI 61 & 372  certified Model Sylax 3 Butterfly Valves.

Flomatic® introduces their NSF/ANSI 61 & 372 certified Model Sylax 3 Butterfly Valves.

4/21/2020

April 21, 2020 Glens Falls, NY – Flomatic is proud to introduce the new model Sylax® 3 Lug style and wafer style Butterfly valves. The Sylax® 3 has a strong ductile iron valve body, 316SS Disc standard, EPDM Seat, and stainless steel stem. The valve is rated for 250 PSI bi-directional & dead end rating and has a 230°F (110°...

continue reading

Flomatic announces their new Stainless Steel Model Cycle Gard IV CB152SST

Flomatic announces their new Stainless Steel Model Cycle Gard IV CB152SST

3/17/2020

March 17, 2020 Glens Falls, NY – Flomatic is proud to introduce the new Stainless Steel direct acting constant pressure pump control valve with tappings, Model Cycle Gard ® IV CB152SST. This flow efficient globe style, all stainless steel body is equipped with a  1” NPT size female inlet threads and with a 1” NPT union en...

continue reading



page 1 of 7 : <<   1 2 3 4 5 6 7   >>


Facebook YouTube Linked-In
Customer Satisfaction Survey

Prop 65 Warning

Rep Locator
Shipment Tracking
UPS FedEX

National Ground Water Association Water Systems Council weftec American Water Works Association Submersible Wastewater Pump Association