Foot Valves

Foot Valves Manufacturer

Foot Valves are a form of check valve, installed at the bottom of Pump suction line, inside the wet well. Foot valves are an inexpensive way to prime a single centrifugal pump. Since Foot Valves are continually submerged in the wet well and not readily accessible for inspection or repair, it is important to select a Foot Valve of high quality long wearing construction. Typical materials include PVC or plastic and bronze for foot valves.

PVC Foot Valves

Flomatic® Corporation, manufacturer of:

  • PVC Foot Valves
  • Bronze Foot Valves
  • Stainless Steel Foot Valves
  • Cast Iron Foot Valves
  • Plastic Foot Valves
6SS
6SS
Strainer
Size(s): 1 - 1 1/4 inch (25 mm - 32 mm)
333SS
333SS
Foot Valves
Size(s): 1 - 1 1/4 inch (25 mm - 32 mm)
80S6FVFD
80S6FVFD
Foot Valves
Size(s): 1 - 10 inch (25 mm - 250 mm)
812XTF
812XTF
Foot Valves
Size(s): 1/2 - 8 inch (15 mm - 200 mm)
63
63
Foot Valves
Size(s): 2 - 6 inch (50 mm -150 mm)
357
357
Foot Valves
Size(s): 1 1/4 - 8 inch (32 mm - 200 mm)
104P
104P
Foot Valves
Size(s): 1 - 1 1/4 inch (25 mm - 32 mm)
190D/193D/190P
190D/193D/190P
Foot Valves
Size(s): 3/8 - 2 inch (10 mm - 50 mm)
124P
124P
Foot Valves
Size(s): 3/4 - 2 inch (20 mm - 50 mm)
333DPE
333DPE
Foot Valves
Size(s): 1 1/4 - 1 1/2 inch (32 mm - 40 mm)
333E
333E
Foot Valves
Size(s): 1 - 1 1/4 inch (25 mm - 32 mm)
60SE
60SE
Foot Valves
Size(s): 1/2 - 4 inch (15 mm - 100 mm)
302S6
302S6
Foot Valves
Size(s): 2 - 12 inch (50 mm - 300 mm)
302BT
302BT
Foot Valves
Size(s): 2 - 24 inch (50 mm - 600 mm)

Foot Valves

  • Temp Max: 180F (80C) Pressure Max: 250 PSI All 303 stainless steel body with threaded female connection. Stainless steel strainer with unleaded bronze. Stainless steel or plastic caps. Size(s): 1
    Manufactured by: Flomatic Corporation
    Model: 6SS
  • Temp Max: 180F (80C) Pressure Max: 250 PSI All 303 Stainless steel body with high strength acetal poppet. Tappered stainless steel strainer, end cap, spring and fasteners. NITRILE (Buna-N) seal. Size(s): 1
    Manufactured by: Flomatic Corporation
    Model: 333SS
  • Temp Max: 400F (100C) Pressure Max: 400 PSI All 316 stainless steel threaded check valve body. Stainless steel spring, poppet, strainer and VITON seal. Size(s): 1 to 8in. (25 to 200 mm)
    Manufactured by: Flomatic Corporation
    Model: 80S6F
  • Temp Max: 400F (200C) Pressure Max: 300 PSI 812XTF- All 316 stainless steel, threaded female connection. Metal to metal seating and teflon O-ring. 2"-6" available with socket weld connection add 10% to list (Model 812XSF). 1-1/2"-8" available with NITRILE (Buna-N) or VITON seal, add 10% to list (Model 812XRF/812XVF). Size(s): 1/2 to 8 in. (15 to 200 mm)
    Manufactured by: Flomatic Corporation
    Model: 812XTF
  • Temp Max: 180F (80C) Pressure Max: 250 PSI Cast iron body with epoxy coating. Features threaded female connection. NITRILE (Buna-N) seal, high strength non-metallic or unleaded bronze or ductile iron poppet, stainless steel spring. Heavy duty polyethylene strainer. Size(s): 2 to 6 in. (50 to 150 mm)
    Manufactured by: Flomatic Corporation
    Model: 63
  • Temp Max: 80F (27C) Pressure Max: 75 PSI Cast iron body and strainer. Threaded female connection. Hinged leather seat. Size(s): 1-1/4 to 8 in. (32 to 200 mm)
    Manufactured by: Flomatic Corporation
    Model: 357
  • Temp Max: 140F (60C) Pressure Max: 150 PSI Features rugged high-strength Noryl GTX 830 valve body with a tapered stainless steel, NITRILE (Buna-N) seal and polypropylene follower. Size(s): 1-1/4 in. (32 mm)
    Manufactured by: Flomatic Corporation
    Model: 104PS
  • Temp Max: 180F (80C) Pressure Max: 150 PSI Reinforced nylon body with threaded female connection. Polyethylene strainer, polyethylene/acetal poppet. NITRILE (Buna-N) seal (3/4" is EPDM) and stainless steel spring. Size(s): 3/4
    Manufactured by: Flomatic Corporation
    Model: 104P
  • 190D- Acetal body and strainer, Nylon 11 poppet. Stainless steel spring and NITRILE (Buna-N) seal. 193D- Similar to the 190D with one-piece acetal body and strainer. 190P- Polypropylene body and strainer. Stainless steel spring and VITON seal. Size(s): 3/8
    Manufactured by: Flomatic Corporation
    Model: 190D
  • 190D- Acetal body and strainer, Nylon 11 poppet. Stainless steel spring and NITRILE (Buna-N) seal. 193D- Similar to the 190D with one-piece acetal body and strainer. 190P- Polypropylene body and strainer. Stainless steel spring and VITON seal. Size(s): 3/8
    Manufactured by: Flomatic Corporation
    Model: 193D
  • 190D- Acetal body and strainer, Nylon 11 poppet. Stainless steel spring and NITRILE (Buna-N) seal. 193D- Similar to the 190D with one-piece acetal body and strainer. 190P- Polypropylene body and strainer. Stainless steel spring and VITON seal. Size(s): 3/8
    Manufactured by: Flomatic Corporation
    Model: 190P
  • Temp Max: 140F (60C) Pressure Max: 150 PSI features a simple flow through design with corrosion resistant parts. Durable Nylon body that has a 4 in 1 combo feature (3/4 1-1/2)
    Manufactured by: Flomatic Corporation
    Model: Size(s): 3/4
  • Temp Max: 180F (80C) Pressure Max: 250 PSI ENVIRO CHECK - body, but with dual purpose male and female threads. Size(s): 1 to 1 1/2 in. (25 to 40 mm)
    ENVIRO CHECK
    Manufactured by: Flomatic Corporation
    Model: 333DPE
  • Temp Max: 180F (80C) Pressure Max: 250 PSI ENVIRO CHECK - body with high strength acetal poppet. Tapered stainless steel strainer, end cap, spring and fasteners. NITRILE (Buna-N) seal. Size(s): 1 to 1 1/4 in. (25 to 32 mm)
    ENVIRO CHECK
    Manufactured by: Flomatic Corporation
    Model: 333E
  • Temp Max: 180F (80C) Pressure Max: 250 PSI (1/2size 150 PSI) ENVIRO CHECK - body with threaded female connection. Features a NITRILE (Buna-N) seal, acetal poppet (2-1/2" ,3" and 4" has bronze poppets) stainless steel spring and strainer. Size(s): 1/2 to 4 in. (15 to 100 mm)
    ENVIRO CHECK
    Manufactured by: Flomatic Corporation
    Model: 60SE
  • Temp Max: 180F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24" Cast iron body with epoxy coating, bronze disc and seat (2"-12"). Flanged connection ANSI 125. Features a Viton seal and stainless steel strainer.) Size(s): 2 to 24 in. (50 to 600 mm)
    Manufactured by: Flomatic Corporation
    Model: 302BT
  • Temp Max: 180F (80C) Pressure Max: 200 PSI All 316 stainless steel body. ANSI class 125# flanged connection. Features a Buna-N seal and 304 stainless steel strainer. Size(s): 2
    Manufactured by: Flomatic Corporation
    Model: 302S6
Facebook YouTube Linked-In
Customer Satisfaction Survey

Prop 65 Warning

Rep Locator
Shipment Tracking
UPS FedEX

National Ground Water Association Water Systems Council weftec American Water Works Association Submersible Wastewater Pump Association