C150E / C150ET



Pressure Reducing Valve
Size(s): 1/2 - 2 inch (15 mm - 50 mm)
Description:
PRESSURE REDUCING VALVE (PRV) - Model C150E when properly installed will regulate high inlet pressure to a lower regulated outlet pressure within a range regardless of water flow. This is accomplished by an adjustable spring loaded balancing valve factory set to automatically regulate the downstream pressure. Supplied with one FNPT tail-piece and union nut.
NSF/ANSI 61 Certified and ASSE® Listed 1003
Temp Max: 180°F (80°C)
Pressure Max: 400 PSI
Factory set at 50 PSI
Literature
C150E Literature |
1/2" Thru 1-1/4" O&M |
1-1/2" & 2" O&M |
NSF/ANSI 61 Approval |
Specs
1/2" thru 1-1/4" C150E |
1-1/2" & 2" C150E |
3/4" & 1" C150E w/ Pex Connections |
1/2" thru 2" C150E Fall Off Chart |
1/2" thru 2" Written Specification |
Sizes/Price
SIZE | PART # 15-75 PSI | C150E | C150ET |
1/2" | C150099E | $188 | |
3/4" | C150000E | $194 | $160 |
1" | C150001E | $235 | $206 |
1 1/4"* | C150002E | $414 | |
1 1/2" | C150003E | $1,236 | |
2" | C150004E | $1,323 | |
SIZE | PART # 15-150 PSI | C150E | C150ET |
1/2" | C150199E | $188 | |
3/4" | C150100E | $194 | $160 |
1" | C150101E | $235 | $206 |
1 1/4"* | C150102E | $414 | |
1 1/2" | C150103E | $1,236 | |
2" | C150104E | $1,323 |
* Note: 1¼" size is one size smaller restricted flow. Maximum 25 GPM, see model C150EHF on left for higher capacity.
For double union add "U" to the end of the part number and add 10% to the list price.